What Problems Should Be Paid Attention To When Using Single-layer Eddy Current Separator?
1.The eddy current separator and vibrating feeder can only start feeding once they are operating normally.
2.Regularly inspect the belt condition; immediately remove any debris that cannot be swept off.
3.Under normal circumstances, the temperature rise of the bearing shall not exceed 40°C, and the surface temperature shall not be higher than 80°C.
By measuring the temperature rise during the operation of the spindle bearing, we can know whether the spindle bearing is normal. If the temperature of the bearing is found to exceed 70-80°C during the monitoring, it should be stopped immediately for inspection.
4. Before stopping the machine, stop the feeding first. The motor can only be turned off after all materials in the eddy current separator and vibrating feeder have been completely processed.
RUIJIE Single-layer Eddy Current Separator Sorts The Aluminum
Single-layer Eddy Current Separator Solid Waste Sorting Project Application Site
The eddy current sorting machine is designed to separate non-ferrous metals (such as copper, aluminum, and zinc) from non-metallic materials (like plastic) in solid waste, with a focus on materials larger than 2mm. It replaces manual sorting, addressing the inefficiencies of manual work, boosting production efficiency, and enabling the sorting system to automatically separate non-ferrous metals from non-metallic substances in the materials.
